The following table summarizes technical specification and operational characteristics of the Zortrax M300 Dual.
| Device | |
|---|---|
| Build Volume | 265 x 265 x 300 mm [10.4 x 10.4 x 11.8 in] |
| Nozzle Diameter | 0.4 mm [0.016 in] – standard, 0.6 mm [0.024 in] |
| Extruder | Dual, printing with model and support material |
| Extruder Cooling System | Two fans cooling the extruder; radial fan cooling the print |
| Hotend | Dual |
| Platform | Heated; perforated and glass plates are applicable |
| Material Endstop | 2 x mechanical |
| Connectivity | Wi-Fi, Ethernet, USB |
| Operating System | Android |
| Processor | Quad Core |
| Touchscreen | 4″ IPS 800 x 480 |
| Camera | Yes |
| Printing | |
| Technology | LPD Plus (Layer Plastic Deposition Plus) – advanced technology depositing melted thermoplastics with dissolvable support structures |
| Layer Resolution | 150 – 300 microns (for 0.4 mm / 0.016 in nozzle) |
| Minimal Wall Thickness | 450 microns (for 0.4 mm/0.016 in nozzle) |
| Platform Levelling | Automatic measurement of platform points’ height / manual measurement of platform points’ height |
| Filaments | |
| Available Filaments | Full offer is available at: filaments |
| External filaments | Applicable |
| Support | Mechanically removed – printed with the same material as the model Water-soluble – printed with a different material than the model |
| Filament container | Spool |
| Filament diameter | 1.75 mm (0.069 in) |
| Temperature | |
| Maximum printing temperature (extruder) | 310° C [590° F] |
| Maximum Platform Temperature | 105° C [221° F] |
| Ambient Operating Temperature | 20 – 30° C [68 – 86° F] |
| Storage Temperature | 0 – 35° C [32 – 95° F] |
| Electrical | |
| AC Input | 110 V ~ 5.9 A 50/60 Hz 240 V ~ 2.5 A 50/60 Hz |
| Maximum Power Consumption | 400 W |
| Software | |
| Software Bundle | Z-SUITE |
| Supported File Types | .stl, .obj, .dxf, .3mf, .ply |
| Supported Operating Systems | Mac OS Catalina and newer versions / Windows 10 and newer versions |
| Additional Information | |
| Each delivered printer may have worked up to 90 hours during the quality control test prints | |
