The following table summarizes all technical specifications and operational characteristics of the Zortrax M300 Plus.

Device
Build Volume 300 x 300 x 300 mm [11.8 x 11.8 x 11.8 in]
Nozzle Diameter 0.4 mm [0.016 in] – standard / 0.3 mm [0.012 in] / 0.6 mm [0.024 in]
Extruder Single (compatible with demanding materials, e.g. TPU or nylon)
Extruder Cooling System Radial fan cooling the extruder block; two fans cooling the print
Hotend Single (v3)
Platform Heated; perforated and glass plates are applicable
Material Endstop Mechanical
Connectivity Wi-Fi, Ethernet, USB
Operating System Android
Processor Quad Core
Touchscreen 4″ IPS 800 x 480
Camera Yes
Printing
Technology LPD (Layer Plastic Deposition) – depositing melted material layer by layer onto the build platform
Layer resolution 90 – 390 microns (for 0.4 mm / 0.016 in nozzle)
Minimal wall thickness 450 microns (for 0.4 mm / 0.016 in nozzle)
Platform levelling Automatic measurement of platform points’ height
Filaments
Available Filaments Full offer is available at: filaments
External filaments Applicable
Support Mechanically removed – printed with the same material as the model
Filament container Spool
Filament diameter 1.75 mm (0.069 in)
Temperature
Maximum Printing Temperature (Extruder) 290° C [554° F]
Maximum Platform Temperature 105° C [221° F]
Ambient Operating Temperature 20 – 30° C [68 – 86° F]
Storage Temperature 0 – 35° C [32 – 95° F]
Electrical
AC Input 110 V ~ 5.9 A 50/60 Hz
240 V ~ 2.5 A 50/60 Hz
Maximum Power Consumption 360 W
Software
Software Bundle Z-SUITE
Supported File Types .stl, .obj, .dxf, .3mf, .ply
Supported Operating Systems Mac OS Catalina and newer versions / Windows 10 and newer versions
Additional Information
Each delivered printer may have worked up to 90 hours during the quality control test prints

Was this article helpful?

Yes No

Thank you for your feedback.