• Added new profiles for BASF Ultrafuse ABS, BASF Ultrafuse PET CF 15, BASF Ultrafuse 316L, BASF Ultrafuse 17-4 PH, 3DXTech CARBONX PETG+CF, KIMYA ABS-ESD, KIMYA PETG CARBON, Nanovia PETGCF for Zortrax M300 Dual,
• Added new profiles for Z-ABS, Z-ULTRAT, Z-PLA, BASF Ultrafuse ABS, BASF Ultrafuse PPSU, BASF Ultrafuse PCABS/FR, BASF Ultrafuse 316L, BASF Ultrafuse 17-4 PH, Nanovia PA6, Nanovia PCABS RAIL, Nanovia PABS V0, Z-PEEK with Z-SUPPORT 130 (amorphous), VICTREX PAEK AM200 Z-SUPPORT 130 (amorphous) for Zortrax Endureal,
• Added new profiles for Liqcreate Strong-X, Liqcreate Composite-X, Liqcreate Flexible-X, Liqcreate ESD, Liqcreate Hazard Glow for Zortrax Inskpire 2,
• Added new Infill patterns:
  • Gyroid (Patt. 4),
  • Triangular (Patt. 5),
  • Concentric (Patt. 6).
• Added the Outer Walls option – it is now possible to change the number of contours in models. Higher numbers of contours increase the model’s durability, whereas smaller numbers reduce the print time,
• Added the Offset Inner Contours option. It is now possible to change the distance between inner and outer contours – with smaller offset values both contours will be printed closer to each other, whereas bigger offset values reduce over-extrusion (this option applies also to models printed in the Shell mode),
• The Normal Seam mode is now called Auto,
• Added the Avoid overhangs checkbox in the Seam section. When checked, the slicer will not generate the seam on overhanging layers (if it’s possible),
• Added 3 new Seam modes:
  • User specified,
  • Inner corner,
  • Sharpest corner.
• Improved the quality of thin walls. The infill for thin walls is now generated as a single path with variable material feeding – this reduces the printer’s vibrations and artifacts such as holes on horizontal surfaces in small elements,
• Added the Print Too Thin Walls – when checked, walls thinner than approximately 0.4 mm will be sliced and printed. Additionally, walls with measurements in the range of approximately 0.4 to 0.8 mm will be printed with a single path to achieve best quality and accuracy. (Final measurements depend on the nozzle’s diameter.)
• Improved Smart Bridges areas,
• Improved the quality of slanted surfaces – such areas are now smoother and bonded more effectively,
• Improved the quality of blocks of support – such areas are now smoother and do not have unnecessary elements,
• Improved the stability of top surfaces – such areas are now smoother and supported more effectively,
• Improved bonding between the first layer and the rest of the print for models consisting of only several layers – reduced the risk of layer separation,
• It is now possible to add supports for models printed in the Shell mode,
• Improved connections between support pillars and models on Inkspire 2: supports now leave less marks on models’ surfaces,
• Added the Concentric infill mode in the Solid infill type. The Concentric infill consists of contours that form a concentric shape, improving the part’s durability,
• It is now possible to display a single layer of a model in the Preview step. To do that, it is necessary to clear the checkbox All layers on the toolbar on the right,
• Added new material profiles including BASF Ultrafuse Metal.

Inkspire 2:

• Added support for several BASF Forward AM resins:
• Ultracur3D® RG 3280 with 0.05 mm layer thickness,
• Ultracur3D® RG 35 B with 0.05 and 0.1 mm layer thickness,
• Ultracur3D® RG 1100 B with 0.05 mm layer thickness,
• Ultracur3D® RG 1400 with 0.05 mm layer thickness
• Ultracur3D® ST 80 with 0.1 mm layer thickness,
• Ultracur3D® ST 80 G with 0.1 mm layer thickness.

M Series Plus:

• Added support for a few external filaments:
• BASF Ultrafuse ABS,
• Nanovia PC-ABS V0,

• Added new external-based profiles:
• ULTRAT-based, PLA Pro-based, ASA Pro-based, SEMIFLEX-based, ABS 2-based, ESD PETG-based,

M300 Dual:

• Added support for a few external filaments:
• Nanovia PC-ABS V0,
• BASF Ultrafuse BVOH (some profiles),

• Added new external-based profiles:
• ULTRAT-based, PLA Pro-based, ASA Pro-based, SEMIFLEX-based, ABS 2-based, ESD PETG-based,

Inventure:

• Added support for a few external filaments:
• BASF Ultrafuse BVOH (some profiles),

• Added new external-based profiles:
• ULTRAT-based, PLA Pro-based, ASA Pro-based, SEMIFLEX-based, ABS 2-based, ESD PETG-based,

Z-SUITE 2.31.0 is the last version supported on Mac OS Mojave operating system. With the release of the next versions, Z-SUITE will be supported on Mac OS Catalina and newer versions of the system.


• Inkspire 2: Added support for Henkel/Loctite 3D 3172 HDT50 High Impact resin

Bug fixes:

• Fixed a bug where the program would not save the choice of the default printer in the Preferences tab,
• Fixed a bug where occasionally incorrect choice of settings would be displayed in the Print settings step,
• Fixed a bug where the program would not copy models on macOS,
• Fixed a bug where sending files to Inkspire through the Add Files option in My Devices panel would cause problems,
• Fixed a bug where saving the resignation from displaying a pop-up note about the need to scale the model when using high-temp filaments on Zortrax Endureal would not work,
• Improved a double-click opening of program-related files on Windows and macOS,
• Removed a pop-up note about the Autorotate after pasting a model into the platform,
• Minor support and raft generation fixes on resin printers

• Added support for a new UV LCD 3D printer — Zortrax Inkspire 2 with printing profiles for engineering resins by BASF Forward AM and Henkel/Loctite,
• Added a new notification center (the bell symbol in the top right corner of the screen) which notifies users about events taking place in inCloud, Zortrax Library, and available updates,

Bug fixes:

• Fixed a bug where platform compensation would not work properly in some cases when printing raft on M Series Plus, M300 Dual, and Endureal 3D printers,
• Fixed a bug where the program would perform incorrectly after using special keys on the mouse,
• Fixed a problem where logging and registration to Zortrax ID with weak Internet connection would cause the program’s poor responsiveness — users can now stop the connection attempt.

• Added a new tool – Add Text – which allows users to create a text to be printer on the model’s surface,
• Added a new tool – Measure – which allows users to measure distances on models,
• The program now operates more efficiently on the newest macOS systems,
• Improved the program’s overall performance (macOS version),
• It is now possible to open more than 4 tabs (max. 16)(macOS version),
• Improved the program’s stability (macOS version),

M300 Dual:

• Added new printing profiles:
• Z-FLEX + Z-SUPPORT ATP with 0.15 and 0.20 mm layer thickness values for 0.4 mm nozzle,
• Z-NYLON with 0.50 mm layer thickness values for 0.6 mm nozzle (single-extrusion mode),
• Z-NYLON + Z-SUPPORT ATP with 0.30, 0.40, 0.50 mm layer thickness values for 0.6 mm nozzle,
• Z-PLA with 0.30, 0.40, 0.50 mm layer thickness values (single-extrusion mode) for 0.6 mm nozzle,
• Z-ULTRAT Plus with 0.50 mm layer thickness values (single-extrusion mode) for 0.6 mm nozzle,
• BASF Ultrafuse PAHT CF15 + Z-SUPPORT ATP with 0.30 and 0.40 layer thickness values for 0.6 mm steel nozzle,

Endureal:

• Increased the maximum temperature values of the platform and the printing chamber for low-temp filaments,
• Improved the process of simultaneous heating of the platform and the printing chamber,

Bug fixes:

• Fixed an issue where setting the Stabilization Time to more than 255 minutes on Zortrax Endureal would cause problems,
• Fixed an issue where after using the Split option there would appear models with gaps in their mesh,
• Fixed an issue where unchecking the option to store the program’s history would not work,
• Fixed an issue where deleted models would appear on the platform in the Preview step,
• Saving a .zcodex file for Inkspire with a hole on a model’s tip (Hollow mode) should no longer cause problems (Windows version),
• Loading a device using the External LCD Printer option should no longer cause problems when the platform’s dimensions include decimal values (Windows version),
• Fixed an issue where zprojx files would have an incorrect name after re-saving (macOS version),
• Fixed an issue where the program would cause high CPU usage (macOS version),
• Fixed an issue where using the right mouse button would cause problems with moving the workspace (macOS version),

M300 Dual:

• Added support for BASF Ultrafuse® PP GF30 with 0.30 and 0.40 mm layer thickness values for 0.6 mm steel nozzle (single-extrusion mode),
• Added support for BASF Ultrafuse® PAHT CF15 with 0.30 and 0.40 mm layer thickness values for 0.6 mm steel nozzle (single-extrusion mode),
• Added new printing profiles for regular 0.6 mm nozzles:
• Z-GLASS + Z-SUPPORT Premium 0.30, 0.40 and 0.50 mm,
• Z-NYLON 0.30 and 0.40 mm (single-extrusion mode),
• Z-ULTRAT Plus 0.30 and 0.40 mm (single-extrusion mode)
• Added new External Materials profiles: PP GF30-based and PAHT CF15-based.

• inCloud printers are now sorted by their status in the file export window in the Preview step,
• It is now possible to change a file’s name directly in the file export window in the Preview step when sending it to the printer via inCloud,
• Information about no USB inserted in the printer is now shown in the file export window in the Preview step,

Inkspire:

• Added support for Zortrax Resin TOUGH Black,
• Changed the default time settings for Additional Support Exposure Time,

Bug fixes:

• Fixed problems when generating editable support for M Series Classic printers,
• Using the Save as option after opening projects through File -> Open recent has been improved,
• Fixed an issue where exporting a zcodex2 file would be impossible after going back to previous steps,
• Improved raft removal with models printed in the Solid mode,
• inCloud tab scaling has been improved on macOS systems,
• Fixed an issue where the program would crash during login attempts with an open Preferences tab on macOS Catalina and Mojave,
• Graphical visibility of the inCloud printers with an offline status has been improved in the export window in the Preview step.