• Minor bug fixes.

• Added support for Kimya ABS-ESD.

• Added support for BASF Ultrafuse 316L, BASF Ultrafuse 17-4 PH, BASF Ultrafuse Support Layer and BASF Ultrafuse ABS.

• Added a new option Print Speed Adjustments which allows you to control the speed of printing,

• Added support for Nanovia PC ABS V0
• Added the possibility to select the nozzle diameter
• Added support for BASF Ultrafuse BVOH
• Platform offset is now reset after each calibration

• Added Korean to the list of supported languages,
• Added missing menu texts,
• Changed the content of the EULA,
• Added support for BASF Ultrafuse PET CF15, 3DXTECH CarbonX PETG+CF, Kimya PETG Carbon and Nanovia PETG CF,
• It is now possible to block the printer in the event of theft,

• Improved the way files are loaded from the USB drive,
• Introduced a notification about the need to clean the nozzle and calibration pads before platform calibration,
• Introduced a notification in the File Details tab about the .zcodex file format — it will no longer be supported,
• Improved managing of the network settings — clicking the Disconnect button redirects the user to the Connectivity options window.

• Added the deformation scan procedure – any platform deformation is now compensated when printing rafts,
• Added the autoupdater – if not disabled, the printer will automatically install the update after 30 minutes from notifying the user,
• It is now possible to perform the automatic Offset Z calibration,
• It is now possible to filter the zcodex2 files according to the specific printer model or the specific printer model and loaded filament.

In order to get full advantage of the new autocalibration process – please remember to run it as the first step after updating the firmware to 2.6.0 (Z-SUITE 2.26.0 or the latest update required).

• Improved communication with inCloud,
• Platform heating now depends on the type of loaded material during Nozzle Alignment Calibration,
• Fixed a bug where platform temperature would sometimes drop mid-print,
• Bug fixes and stability improvements.

• Improved connection stability with Zortrax inCloud,
• Fixed a bug where bottom extruder fan would not turn off after finished printing process,
• A failsafe message will now pop up when a false blackout is detected,
• Improved platform automatic calibration.

• Fixed a bug where the extruder bottom fan would not work in some cases.

• Stability and performance improvements,
• Added support for Z-ABS and Z-ASA Pro (single-extrusion mode),
• Introduced the previous method for automatic calibration (contact-free method introduced in 2.5.0 version is now unavailable).

• Added support for Z-SUPPORT ATP,
• Removed support for Z-ESD v2,
• Fixed issues with refreshing the lifetimer.

• Platform autocalibration is now faster,
• Improved hotend switch calibration procedure,
• Platform manual calibration is now faster and simplified,
• Introduced a screensaver,
• It is now possible to restore devices to factory settings,
• Suggested maintenance procedures are now marked DONE once they’ve been carried out,
• Overall stability improvements.

• Added support for Z-ABS, Z-ASA Pro, and Z-SUPPORT ATP filaments.

• It is now possible to determine a device’s location with the Find device option in inCloud,
• Recommended maintenance actions can now be displayed in the printer’s panel in inCloud,
• The LEDs will now light up once the camera preview is displayed in inCloud,
• Fixed a bug where the Working options menu would crash,
• Fixed a bug where timeout would not work properly in the Sleep mode.

• Fixed a bug where application would unexpectedly crash,
• Fixed a bug where previously printed files would be occasionally displayed in the printer’s panel when starting a new print through inCloud,
• Fixed a bug where Preparing to print notification would not be properly displayed in inCloud,
• Added a new option – inCloud connection test,
• Added missing menu texts.

• Fixed issues where error messages would pop up when installing firmware update

• Added support for Zortrax inCloud,
• Added new printer statuses in My Devices panel in Z-SUITE,
• Changed hotend symbols; hotends are now marked (A) and (B) in the entire menu,
• Improved the autocalibration procedure in terms of precision and reliability,
• Changed the minimal loading temperature for external materials,
• Simplified material management in the pause menu,
• Improved heating control menu – printers will now start to heat up once the user presses ON,
• Added a warning for cases with camera problems,
• Printers will now wait 5 minutes for the user to remove excess material from the nozzle when resuming the printing. After this time, the printing will be resumed automatically,
• Changelog for each update will now be available to view before installation,
• Fixed a bug where printer settings, e.g. for LED colors, would be deleted,
• Fixed a bug where the sprocket wheel could stop for a short time during material loading with the Ignore material jam option enabled,
• Fixed a bug where material unloading would continue for a short time after reaching 100% with the Ignore material jam option enabled,
• Fixed cases where LEDs would change their color during a failsafe response,
• Fixed a bug with the buzzer; it is now possible to turn it off.

• Performance improvements,
• Fixed an issue where the printer couldn’t automatically detect a fans malfunction,
• Fixed a bug where an unexpected error would appear after skipping a failsafe during autocalibration,
• Fixed an issue where information on a saved printing process would appear on the screen only after a reboot.

• Stability improvements,
• Introduced the registration procedure using Zortrax ID,
• Added new interface language: Italian,
• Improved control of fans operation,
• Fixed problems with incorrect notifications about finishing the printing process,
• Improved blackout reaction – if the power outage doesn’t last for too long, printers will maintain platform temperature above 80%,
• Heating management tools are now available in the Heating controls menu (it includes options for platform and extruder heating),
• Added support for Z-ESD v2,
• Fixed an issue with detecting a potential malfunction of temperature sensor.

• Stability improvements related to UI,
• Increased waiting time during the material loading procedure.

• Detection procedure for errors #2:3 / #3:3 has been changed,
• Errors #2:3 and #3:3 are now warning messages, not failsafe responses.

• Fixes an error that would appear when printing files prepared in older versions of Z-SUITE (<=2.9.0),
• Printers now wake up from the Sleep Mode after pressing the DONE button,
• Fixes a bug with platform manual calibration,
• Fixes minor bugs.